Machine Tools

Ergomat - Automatic Horizontal lathes

This machine type is destined, in general, to the serial production of medium and big lots. Most of the applications are in the machining of pieces starting from bars up to 60mm of diameter.

There are also applications for machining of pieces pre-formed (wrought, founded, etc.) with fixation for plate.

The studies of time of production are elaborated to leave of the concepts of the machining technology. The lot size depends on the time of the cycle of one piece's machining. The most important is that the machine works the largest possible time so it can dilute the time of preparation in a economic way.

The cam group (curves) for the machining of one certain piece is projected to reach the largest revenue of the machine, that is to say, the time of the cycle optimized. A lot of times, a cam group can be used to machining families of pieces, which becomes very economic.

The production level depends on the geometry and material of the part to be machined. Depending of these parameters, automatic lathes can reach a production of approximately 200 parts/hour.

Automatic lathes CNC with multiple cars

This lathe type uses the technique of CNC in the concept constructive of the classic automatic lathes the cams.

Main Advantages

• Fast time of preparation: of 1/2 at 1 hour depending on the ability of the operator and if the program is already optimized.
• More select maintenance, face to the electronic group.The preventive is fundamental in this lathe.
• It operates in the ideal conditions of usinagem (progresses and rpm).
• It releases the use of additional devices to shape longitudinal, thread cutting, etc.
• It facilitates the work of production planning, economic usinagem also of small and averages series.
• Speed to execute prototypes at a low cost of tool (if compared with the automatic cams lathes).

News

• It is a lathe CNC
• MCS CNC of easy and fast interactive programming
• Crossed car CNC that allows to profile, to copy with lineal and circular interpolation, thread cutting.

• Manual Mode reproduces a conventional lathe, Handwheel driven with a digital Read-out
  
  
• Manual Plus Mode allows record enhanced manual operation with macros for roughing , profile definition, thread cutting,... with graphical help. The operator can go step by step testing in simulation mode ( graphics ) or cutting the part ( cycle ) for approval and finally recording the step in a previous defined program. When he finished the part, the program is recorded and tested, ready for execution again.
  
  
• Automatic Mode allows a standard CNC operation , with MDI mode, ISO programming , MCS dialogue programming , Macro programming, Step-by-step execution mode, and Continuous execution mode
  All features of a standard Series 500 CNC for lathes, including lathes Macros support.
  
  
• Graphics , Simulation and Monitoring of program execution
  Statistics forms generation for on-screen analysis and for printing interface(RS232)
  
  
• Special operation interface : MDI dialogue macro
  
  
• DNC operation
  
  
• Macro Programming

Print Screen